> AC Milivolt meter
> AM/ FM Signal Generator
> Arbitrary Waveform Generator
> Auto Ranging RF Milivolt Meter
> Automatic Modulation Meter
> Directional Watt Meter
> Multi Function Test System
> Multifunction Counter
> Network Analyzer
> RF Attenuator
> RF Power Meter
> RF Signal Generator
> Spectrum Analyzer
> Synthesized Signal Generator
 
   
RF Signal Generator

Model      

2425

2427

2429

Frequency
Frequency Range 9 kHz to 1 GHz 9 kHz to 2 GHz 9 kHz to 3 GHz
Frequency Resolution  0.1 Hz
Frequency Stability  

-Ageing Rate for reference frequency

< 1 x 10-6 /year < 2 x 10-7 /year

-Temp. stability for reference frequency

< 0.5 x 10-6 < 2 x 10-7
Spectral Purity 
SSB Phase Noise at 1GHz, on 20KHz offset and 1Hz Bandwidth           < -115 dBc < -95 dBc
Harmonics at levels 0 dBm          at 1GHz < -30 dBc at 2GHz < -30 dBc at 3GHz < -30 dBc
Non Harmonics (>10 KHz carrier offset) < -60 dBc < -50 dBc
Reverse Power Protection            50 Watt 2 Watt
Output Level 
Range                                       -137 dBm to +13 dBm
Resolution                      0.1 dB
Total Accuracy (for levels > -120 dBm) at 25°C < ± 0.8 dB < ± 1 dB
VSWR                                       < 1.5 < 1.5 at 1GHz and
< 2.0 at other frequencies
< 1.5 at 1GHz and
< 2.0 at other frequencies
Simultaneous Modulations Combination of AM, FM or Phase Modulation and Pulse Modulation AM, FM or Phase Modulation,
IQ and Pulse Modulation
Amplitude Modulation                  Internal, external
Modulation Frequency Range (3dB), f > 100 KHz DC / 10 Hz to 20 KHz
Modulation Depth                        0 to 99.9% 0 to 100%
Resolution     0.1%
AM Distortion at 1 KHz < 1.5% (m= 30%) < 5% of reading + 0.2%
(m< 80%), 0 dBm
Frequency Modulation     Internal, external
Frequency Deviation                   0 Hz to 1 Mhz at 1 GHz carrier 0 Hz to 1 MHz at 2 GHz carrier 20 to 100 KHz
Resolution 1% min. 10 Hz 1% min. 1 Hz
Modulation Frequency Range (-3 dB) std DC / 10 Hz to 20 KHz DC / 20 Hz to 80 KHz
Setting Error (at AF = 1 KHz and 50% max. deviation) <4% of reading +20Hz <5% of reading +300 Hz
Phase Modulation       Internal, external
Phase Deviation                         0 rad to 10 rad (min)
Resolution         0.01 rad.
Setting Error (at AF = 1 KHz)        < 4% of reading + 0.02 rad. < 5% of reading + 0.2 rad.
Pulse Modulation With built-in pulse generator
Operating Modes                        Internal, External  
Pulse repetition frequency            0 Hz to 2.5 MHz  
ON / OFF ratio                           > 80 dB  
Internal Modulation Generator
Frequency                                 0.1 Hz to 1 MHz with resolution of 0.1 Hz 20 Hz to 80KHz with resolution of 0.1Hz (for AM/FM/Phase M)
Rise / Fall Time   <3 micro sec
I/Q Modulation   External, DC to 40MHz
Sinad 
Input Frequency                         1 KHz
Input Level   30 mV to 3 V r.m.s.
Indication                                   Analogue meter, scaled range 30 dB to 6 dB
Impedance       ≥ 7/5 K ohms
Bandwidth (± 3 dB)                     60 Hz to 6 KHz
General  
Memory                                     100 Storage settings  
Digital Sweep                             RF, AF in Automatic, Single shot, manual, Logarithmic modes RF, LF in Continuous Sweep,
Single Sweep & Single Step
Interface                                    IEEE-488 and RS 232 USB, RS 232, IEEE-488
Operating Temperature Range      0 to 45 degree C  
Power Requirement                     230V+/-10% AC, 50 Hz +/-3%  
 
 
 
 
 
* Products not listed can be ordered as per request.
* Model number may subject to change without intimation