> Antibiotic Zone Reader
> COD Apparatus
> Colony Counter
> Colori Meter
> Conductivity TDS Meter
> DO Meter
> Electro Phoresis Apparatus
> Flame Photo Meter
> Heating Block
> KF Titrator & Potentiometer
> Leak Test Apparatus
> Melting Point Apparatus
> PH Meter
> Photo Flori Meter
> Turbidity Meter
> UV Cabinet
> UV Spectro Photometer
> Visible Spectro Photometer
> Water/Soil Analysis System
 
 
 
Water Analysis System
CL-200
 
Mode Range Accuracy
Ph 0.00 - 14.00 + / - 0.01
TDS 00 to 1999 PPM 2% F.S.
  00 to 19.99 PPT  
Conductivity 00 to 1999 MICRO S 2% F.S.
  00 to 19.99 MILLI S  
Temperature 0 to 100 Deg C 2 Deg C
DO 0 to 20.0 PPM  
Read out LCD  
Accessories - PH Electrodes
  - TDS Probe
  - D.O. Probe
  - Temp Probe
  - Conductivity cell
  - Electrode stand, holding clamp buffers
   
 
CL-201
 
CL -201 IS BATTERY/MAINS OPERATED MICRO CONTROLLER BASED INSTRUMENT IN BRIFE CASE FOR ESTIMATION FOR PH, CONDUCTIIVITY,TDS,MV,DISSOLVED OXYGEN (D.O.) AND TEMPERATURE MEASUREMENT IN WATER, WASTE WATER AND
BIOLOGICAL APPLICATIONS PH METER IS USED FOR MESUREMENT. MEASUREMENTS ARE DISPLAYED BY A 20 * 4 DIGIT ALPHA NUMERIC LCD.
 
Mode Range Accuracy Resolution
Ph 0.00 - 14.00 0.01 +/- 1 Digit 0.01 PH
  Calibration: 2-3 Point    
MV +/- 1999 MV 1.0 mV +/- 1 Digit 0.1 mV
CONDUCTIVITY 0.1 μS - 100 mS 1% OF F.S +/- 1 Digit 0.1 μS
TDS 0.1 PPM - 100 PPT 1% OF F.S +/- 1 Digit 0.1 PPM
Temperature 0 to 100 Deg C 1 Deg C 0.1 Deg C
DO 0 to 20.0 PPM 1% OF F.S +/- 1 Digit 0.1 PPM
  SALINITY : 0 40 PPM    
Display - 20 * 4 LCD
PRINTER PORT - 80 COLUMN DOT MATRIX
POWER - 230 V 50 HZ WITH INTERNAL BATTERY CHARGER
   
Accessories - Combined Electrode
  - Conductivity Cell 1.0 CC
  - D.O. Probe Au/Ag
  - Temp Probe PT 100
  - Cond. cell
Temp. Compensation - Auto and Manual
   
 
CL-202
 
Mode Range Accuracy Resolution
Ph 0.00 - 14.00 0.01 +/- 1 Digit 0.01 PH
  Sensor : Combined Electrode
MV +/- 1999 MV 1.0 mV +/- 1 Digit 0.1 mV
  Sensor : Combined Electrode
CONDUCTIVITY 0.1 μS - 100 mS 1% OF F.S 1 Digit  
TDS 0.1 PPM - 100 PPT 1% OF F.S 1 Digit  
  Sensor : Conductivity Cell 1.0 CC, Acceptable (0.1 to 5.0)
Temperature Comp. - Auto and Manual
Temperature 0 to 100 Deg C    
DO 0 to 20.0 PPM 1% OF F.S 1 Digit 0.1 PPM
  Salinity : 0 40 PPM
  Sensor : Au / Ag Probe
COLORIMETER 0 TO 2.00 ABS 0.05 ABS 0.01 ABS/ 1% T
  Sensor : Photo diode
  Source : Tungsten Lamp
  Filters : Blue 440, Green 540, Red 660
TURBIDITY 0 - 10 NTU TO 100NTU 2% OF F.S +/- 1 Digit  
  Sensor : Photo Diode
  Source : Tungsten Lamp
Display - 3 1/2 DIGIT LCD
POWER - 230 V 50 HZ WITH INTERNAL BATTERY CHARGER
   
Accessories - Combined Electrode
  - Conductivity Cell 1.0 CC
  - D.O. Probe
  - Temp Probe
  - 4 No. Test Tube for Colori & Turbidity Meter
  - 3 Filters
   
 
CL-203
 
CL -203 IS BATTERY/MAINS OPERATED MICRO CONTROLLER BASED INSTRUMENT IN BRIFE CASE FOR ESTIMATION FOR PH, CONDUCTIIVITY, TDS,MV,DISSOLVED OXYGEN (D.O.),TURBIDITY ,COLORI AND TEMPERATURE MEASUREMENT IN WATER, WASTE WATER AND BIOLOGICAL APPLICATIONS PH METER IS USED FOR MESUREMENT. MEASUREMENTS ARE DISPLAYED BY A 20 * 4 DIGIT ALPHA NUMERIC LCD.
 
Mode Range Accuracy Resolution
Ph 0.00 - 14.00 0.01 +/- 1 Digit 0.01 PH
  Calibration: 2-3 point
DO 0 to 20.0 PPM 1% OF F.S +/- 1 Digit 0.1 PPM
  Salinity : 0 40 PPM
COLORIMETER 0 TO 2.00 ABS 0.05 ABS 0.01 ABS/ 1% T
  0 TO 100% T 0.5% T 0.1% T
  0 TO 9999C
  BY FACTOR
  Sensor : Photo Diode
  Source : Tungsten Lamp
  Filters : Blue 440, Green 540, Red 660
TURBIDITY 0 TO 10 NTU 2% OF F.S +/- 1 Digit 0.1 NTU
  0 TO 100 NTU
  0 TO 500 NTU
  Sensor : Photo Diode
  Source : Tungsten Lamp
Display - 20 * 4 DIGIT LCD
PRINTER PORT - 80 COLUMN DOT MATRIX
POWER - 230 V 50 HZ WITH INTERNAL BATTERY CHARGER
   
Accessories - Combined Electrode
  - Conductivity Cell 1.0 CC
  - D.O. Probe Au/Ag Probe
  - Temp Probe PT100
  - 4 No. Test Tube for Colori
  - 3 Filters Blue 440, Green 540, Red 660
  - Test Tube (25 * 4)MM 4 Nos. for Turbidity
  - Light Shield
Temp Comp. - Auto and Manual
 

* Products not listed can be ordered as per request.